Next: Автоматические обновления, Previous: Networking Setup, Up: Сервисы [Contents][Index]
The (gnu services networking) module discussed in the previous
section provides services for more advanced setups: providing a DHCP service
for others to use, filtering packets with iptables or nftables, running a
WiFi access point with hostapd, running the inetd
“superdaemon”, and more. This section describes those.
This type defines a service that runs a DHCP daemon. To create a service of
this type, you must supply a <dhcpd-configuration>. For example:
(service dhcpd-service-type
(dhcpd-configuration
(config-file (local-file "my-dhcpd.conf"))
(interfaces '("enp0s25"))))
package (default: isc-dhcp)The package that provides the DHCP daemon. This package is expected to provide the daemon at sbin/dhcpd relative to its output directory. The default package is the ISC’s DHCP server.
config-file (default: #f)The configuration file to use. This is required. It will be passed to
dhcpd via its -cf option. This may be any “file-like”
object (see file-like objects). See man
dhcpd.conf for details on the configuration file syntax.
version (default: "4")The DHCP version to use. The ISC DHCP server supports the values “4”,
“6”, and “4o6”. These correspond to the dhcpd program options
-4, -6, and -4o6. See man dhcpd for details.
run-directory (default: "/run/dhcpd")The run directory to use. At service activation time, this directory will be created if it does not exist.
pid-file (default: "/run/dhcpd/dhcpd.pid")The PID file to use. This corresponds to the -pf option of
dhcpd. See man dhcpd for details.
interfaces (default: '())The names of the network interfaces on which dhcpd should listen for
broadcasts. If this list is not empty, then its elements (which must be
strings) will be appended to the dhcpd invocation when starting the
daemon. It may not be necessary to explicitly specify any interfaces here;
see man dhcpd for details.
This is the service type to run the hostapd
daemon to set up WiFi (IEEE 802.11) access points and authentication
servers. Its associated value must be a hostapd-configuration as
shown below:
;; Use wlan1 to run the access point for "My Network".
(service hostapd-service-type
(hostapd-configuration
(interface "wlan1")
(ssid "My Network")
(channel 12)))
Этот тип данных представляет машины для сборки, на которые демон может разгружать сборки. Важные поля:
speed (default: 1.0)Используемый пакет hostapd.
port (default: 22)The network interface to run the WiFi access point.
ssidThe SSID (service set identifier), a string that identifies this network.
port (default: 22)Whether to broadcast this SSID.
speed (default: 1.0)Используемый канал Wi-Fi.
speed (default: 1.0)The driver interface type. "nl80211" is used with all Linux mac80211
drivers. Use "none" if building hostapd as a standalone RADIUS
server that does # not control any wireless/wired driver.
extra-settings (default: "")Extra settings to append as-is to the hostapd configuration file. See https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf for the configuration file reference.
This is the type of a service to simulate WiFi networking, which can be
useful in virtual machines for testing purposes. The service loads the
Linux kernel
mac80211_hwsim module and starts hostapd to create a pseudo WiFi
network that can be seen on wlan0, by default.
The service’s value is a hostapd-configuration record.
This is the service type to set up an iptables configuration. iptables is a packet filtering framework supported by the Linux kernel. This service supports configuring iptables for both IPv4 and IPv6. A simple example configuration rejecting all incoming connections except those to the ssh port 22 is shown below.
(service iptables-service-type
(iptables-configuration
(ipv4-rules (plain-file "iptables.rules" "*filter
:INPUT ACCEPT
:FORWARD ACCEPT
:OUTPUT ACCEPT
-A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-port-unreachable
COMMIT
"))
(ipv6-rules (plain-file "ip6tables.rules" "*filter
:INPUT ACCEPT
:FORWARD ACCEPT
:OUTPUT ACCEPT
-A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp6-port-unreachable
COMMIT
"))))
The data type representing the configuration of iptables.
iptables (default: iptables)The iptables package that provides iptables-restore and
ip6tables-restore.
ipv4-rules (default: %iptables-accept-all-rules)The iptables rules to use. It will be passed to iptables-restore.
This may be any “file-like” object (see file-like
objects).
ipv6-rules (default: %iptables-accept-all-rules)The ip6tables rules to use. It will be passed to ip6tables-restore.
This may be any “file-like” object (see file-like
objects).
This is the service type to set up a nftables configuration. nftables is a
netfilter project that aims to replace the existing iptables, ip6tables,
arptables and ebtables framework. It provides a new packet filtering
framework, a new user-space utility nft, and a compatibility layer
for iptables. This service comes with a default ruleset
%default-nftables-ruleset that rejecting all incoming connections
except those to the ssh port 22. To use it, simply write:
(service nftables-service-type)
Управление конфигурацией операционной системы.
speed (default: 1.0)The nftables package that provides nft.
features (default: '())The nftables ruleset to use. This may be any “file-like” object (see file-like objects).
This is the type of the service running the Network Time Protocol (NTP) daemon, ntpd. The daemon will keep
the system clock synchronized with that of the specified NTP servers.
The value of this service is an ntpd-configuration object, as
described below.
This is the data type for the NTP service configuration.
servers (default: %ntp-servers)This is the list of servers (<ntp-server> records) with which
ntpd will be synchronized. See the ntp-server data type
definition below.
parallel-builds (default: 1)This determines whether ntpd is allowed to make an initial
adjustment of more than 1,000 seconds.
ntp (default: ntp)The NTP package to use.
List of host names used as the default NTP servers. These are servers of the NTP Pool Project.
The data type representing the configuration of a NTP server.
port (default: 22)The type of the NTP server, given as a symbol. One of 'pool,
'server, 'peer, 'broadcast or 'manycastclient.
addressПорядок следования устройств имеет значение.
optionsNTPD options to use with that specific server, given as a list of option names and/or of option names and values tuples. The following example define a server to use with the options iburst and prefer, as well as version 3 and a maxpoll time of 16 seconds.
(ntp-server (type 'server) (address "some.ntp.server.org") (options `(iburst (version 3) (maxpoll 16) prefer))))
Run the ntpd, the Network Time Protocol (NTP) daemon, as
implemented by OpenNTPD. The daemon will
keep the system clock synchronized with that of the given servers.
(service
openntpd-service-type
(openntpd-configuration
(listen-on '("127.0.0.1" "::1"))
(sensor '("udcf0 correction 70000"))
(constraint-from '("www.gnu.org"))
(constraints-from '("https://www.google.com/"))))
This variable is a list of the server addresses defined in
%ntp-servers.
openntpd (default: (file-append openntpd "/sbin/ntpd"))The openntpd executable to use.
listen-on (default: '("127.0.0.1" "::1"))A list of local IP addresses or hostnames the ntpd daemon should listen on.
query-from (default: '())A list of local IP address the ntpd daemon should use for outgoing queries.
sensor (default: '())Specify a list of timedelta sensor devices ntpd should use. ntpd
will listen to each sensor that actually exists and ignore non-existent
ones. See upstream documentation
for more information.
features (default: '())Specify a list of IP addresses or hostnames of NTP servers to synchronize to.
features (default: '())Specify a list of IP addresses or hostnames of NTP pools to synchronize to.
constraint-from (default: '())ntpd can be configured to query the ‘Date’ from trusted HTTPS servers
via TLS. This time information is not used for precision but acts as an
authenticated constraint, thereby reducing the impact of unauthenticated NTP
man-in-the-middle attacks. Specify a list of URLs, IP addresses or
hostnames of HTTPS servers to provide a constraint.
constraints-from (default: '())As with constraint from, specify a list of URLs, IP addresses or hostnames
of HTTPS servers to provide a constraint. Should the hostname resolve to
multiple IP addresses, ntpd will calculate a median constraint from
all of them.
This service runs the inetd (see inetd invocation in GNU Inetutils) daemon. inetd listens for connections on internet
sockets, and lazily starts the specified server program when a connection is
made on one of these sockets.
The value of this service is an inetd-configuration object. The
following example configures the inetd daemon to provide the
built-in echo service, as well as an smtp service which forwards
smtp traffic over ssh to a server smtp-server behind a gateway
hostname:
(service
inetd-service-type
(inetd-configuration
(entries (list
(inetd-entry
(name "echo")
(socket-type 'stream)
(protocol "tcp")
(wait? #f)
(user "root"))
(inetd-entry
(node "127.0.0.1")
(name "smtp")
(socket-type 'stream)
(protocol "tcp")
(wait? #f)
(user "root")
(program (file-append openssh "/bin/ssh"))
(arguments
'("ssh" "-qT" "-i" "/path/to/ssh_key"
"-W" "smtp-server:25" "user@hostname")))))))
See below for more details about inetd-configuration.
Data type representing the configuration of inetd.
program (default: (file-append inetutils "/libexec/inetd"))The inetd executable to use.
entries (default: '())A list of inetd service entries. Each entry should be created by
the inetd-entry constructor.
Data type representing an entry in the inetd configuration. Each
entry corresponds to a socket where inetd will listen for
requests.
node (default: #f)Optional string, a comma-separated list of local addresses inetd
should use when listening for this service. See Configuration file in GNU Inetutils for a complete description of all options.
nameA string, the name must correspond to an entry in /etc/services.
socket-typeOne of 'stream, 'dgram, 'raw, 'rdm or
'seqpacket.
protocolA string, must correspond to an entry in /etc/protocols.
wait? (default: #t)Whether inetd should wait for the server to exit before listening
to new service requests.
userA string containing the user (and, optionally, group) name of the user as
whom the server should run. The group name can be specified in a suffix,
separated by a colon or period, i.e. "user", "user:group" or
"user.group".
program (default: "internal")The server program which will serve the requests, or "internal" if
inetd should use a built-in service.
arguments (default: '())A list strings or file-like objects, which are the server program’s
arguments, starting with the zeroth argument, i.e. the name of the program
itself. For inetd’s internal services, this entry must be
'() or '("internal").
See Configuration file in GNU Inetutils for a more detailed discussion of each configuration field.
This is the type of the service running a OpenDHT node, dhtnode. The daemon can be used to host your own
proxy service to the distributed hash table (DHT), for example to connect to
with Jami, among other applications.
Важно: When using the OpenDHT proxy server, the IP addresses it “sees” from the clients should be addresses reachable from other peers. In practice this means that a publicly reachable address is best suited for a proxy server, outside of your private network. For example, hosting the proxy server on a IPv4 private local network and exposing it via port forwarding could work for external peers, but peers local to the proxy would have their private addresses shared with the external peers, leading to connectivity problems.
The value of this service is a opendht-configuration object, as
described below.
Управление конфигурацией операционной системы.
Available opendht-configuration fields are:
opendht-configuration parameter: package opendhtИспользуемый пакет webssh.
opendht-configuration parameter: boolean peer-discovery?Whether to enable the multicast local peer discovery mechanism.
Defaults to ‘#f’.
opendht-configuration parameter: boolean enable-logging?Whether to enable logging messages to syslog. It is disabled by default as it is rather verbose.
Defaults to ‘#f’.
opendht-configuration parameter: boolean debug?Whether to enable debug-level logging messages. This has no effect if logging is disabled.
Defaults to ‘#f’.
opendht-configuration parameter: maybe-string bootstrap-hostThe node host name that is used to make the first connection to the
network. A specific port value can be provided by appending the
:PORT suffix. By default, it uses the Jami bootstrap nodes, but any
host can be specified here. It’s also possible to disable bootsrapping by
setting this to the 'disabled symbol.
Defaults to ‘"bootstrap.jami.net:4222"’.
opendht-configuration parameter: maybe-number portThe UDP port to bind to. When set to 'disabled, an available port is
automatically selected.
Defaults to ‘4222’.
opendht-configuration parameter: maybe-number proxy-server-portSpawn a proxy server listening on the specified port.
Defaults to ‘disabled’.
opendht-configuration parameter: maybe-number proxy-server-port-tlsSpawn a proxy server listening to TLS connections on the specified port.
Defaults to ‘disabled’.
This is the type for a service that runs the Tor anonymous networking daemon. The service is configured using a
<tor-configuration> record. By default, the Tor daemon runs as the
tor unprivileged user, which is a member of the tor group.
tor (default: tor)The package that provides the Tor daemon. This package is expected to provide the daemon at bin/tor relative to its output directory. The default package is the Tor Project’s implementation.
config-file (default: (plain-file "empty" ""))The configuration file to use. It will be appended to a default
configuration file, and the final configuration file will be passed to
tor via its -f option. This may be any “file-like” object
(see file-like objects). See man tor for details
on the configuration file syntax.
hidden-services (default: '())The list of <hidden-service> records to use. For any hidden service
you include in this list, appropriate configuration to enable the hidden
service will be automatically added to the default configuration file. You
may conveniently create <hidden-service> records using the
tor-hidden-service procedure described below.
socks-socket-type (default: 'tcp)The default socket type that Tor should use for its SOCKS socket. This must
be either 'tcp or 'unix. If it is 'tcp, then by
default Tor will listen on TCP port 9050 on the loopback interface (i.e.,
localhost). If it is 'unix, then Tor will listen on the UNIX domain
socket /var/run/tor/socks-sock, which will be made writable by
members of the tor group.
If you want to customize the SOCKS socket in more detail, leave
socks-socket-type at its default value of 'tcp and use
config-file to override the default by providing your own
SocksPort option.
port (default: 22)Whether or not to provide a “control socket” by which Tor can be
controlled to, for instance, dynamically instantiate tor onion services. If
#t, Tor will listen for control commands on the UNIX domain socket
/var/run/tor/control-sock, which will be made writable by members of
the tor group.
Define a new Tor hidden service called name and implementing mapping. mapping is a list of port/host tuples, such as:
'((22 "127.0.0.1:22") (80 "127.0.0.1:8080"))
In this example, port 22 of the hidden service is mapped to local port 22, and port 80 is mapped to local port 8080.
This creates a /var/lib/tor/hidden-services/name directory,
where the hostname file contains the .onion host name for the
hidden service.
See the Tor project’s documentation for more information.
The (gnu services rsync) module provides the following services:
You might want an rsync daemon if you have files that you want available so anyone (or just yourself) can download existing files or upload new files.
This is the service type for the rsync
daemon, The value for this service type is a rsync-configuration
record as in this example:
;; Export two directories over rsync. By default rsync listens on
;; all the network interfaces.
(service rsync-service-type
(rsync-configuration
(modules (list (rsync-module
(name "music")
(file-name "/srv/zik")
(read-only? #f))
(rsync-module
(name "movies")
(file-name "/home/charlie/movies"))))))
See below for details about rsync-configuration.
Data type representing the configuration for rsync-service.
package (default: rsync)rsync package to use.
features (default: '())IP address on which rsync listens for incoming connections. If
unspecified, it defaults to listening on all available addresses.
port-number (default: 873)TCP port on which rsync listens for incoming connections. If port
is less than 1024 rsync needs to be started as the
root user and group.
pid-file (default: "/var/run/rsyncd/rsyncd.pid")Name of the file where rsync writes its PID.
lock-file (default: "/var/run/rsyncd/rsyncd.lock")Name of the file where rsync writes its lock file.
log-file (default: "/var/log/rsyncd.log")Name of the file where rsync writes its log file.
port (default: 22)Owner of the rsync process.
group (default: "root")Group of the rsync process.
uid (default: "rsyncd")User name or user ID that file transfers to and from that module should take
place as when the daemon was run as root.
gid (default: "rsyncd")Group name or group ID that will be used when accessing the module.
modules (default: %default-modules)List of “modules”—i.e., directories exported over rsync. Each element
must be a rsync-module record, as described below.
This is the data type for rsync “modules”. A module is a directory exported over the rsync protocol. The available fields are as follows:
nameThe module name. This is the name that shows up in URLs. For example, if
the module is called music, the corresponding URL will be
rsync://host.example.org/music.
file-nameName of the directory being exported.
comment (default: "")Comment associated with the module. Client user interfaces may display it when they obtain the list of available modules.
read-only? (default: #t)Whether or not client will be able to upload files. If this is false, the uploads will be authorized if permissions on the daemon side permit it.
chroot? (default: #t)When this is true, the rsync daemon changes root to the module’s directory before starting file transfers with the client. This improves security, but requires rsync to run as root.
timeout (default: 300)Idle time in seconds after which the daemon closes a connection with the client.
Модуль (guix inferior) предоставляет следующие процедуры для работы с
ранними версиями:
You might want a syncthing daemon if you have files between two or more computers and want to sync them in real time, safely protected from prying eyes.
This is the service type for the syncthing
daemon, The value for this service type is a
syncthing-configuration record as in this example:
(service openssh-service-type
(openssh-configuration))
See below for details about syncthing-configuration.
Управление конфигурацией операционной системы.
features (default: '())пакет syncthing для использования.
arguments (default: '())Список флагов командной строки, которые следует передать команде
patch.
features (default: '())Sum of logging flags, see Syncthing documentation logflags.
features (default: '())The user as which the Syncthing service is to be run. This assumes that the specified user exists.
port (default: 22)The group as which the Syncthing service is to be run. This assumes that the specified group exists.
speed (default: 1.0)Common configuration and data directory. The default configuration
directory is $HOME of the specified Syncthing user.
Furthermore, (gnu services ssh) provides the following services.
[#:x11-forwarding? #t] [#:tcp/ip-forwarding? #t]
[#:password-authentication? #t] [#:public-key-authentication? #t]
[#:initialize? #t] Run the lshd program from lsh to listen
on port port-number. host-key must designate a file containing
the host key, and readable only by root.
When daemonic? is true, lshd will detach from the
controlling terminal and log its output to syslogd, unless one sets
syslog-output? to false. Obviously, it also makes lsh-service depend
on existence of syslogd service. When pid-file? is true,
lshd writes its PID to the file called pid-file.
When initialize? is true, automatically create the seed and host key upon service activation if they do not exist yet. This may take long and require interaction.
When initialize? is false, it is up to the user to initialize the randomness generator (see lsh-make-seed in LSH Manual), and to create a key pair with the private key stored in file host-key (see lshd basics in LSH Manual).
When interfaces is empty, lshd listens for connections on all the network interfaces; otherwise, interfaces must be a list of host names or addresses.
allow-empty-passwords? specifies whether to accept log-ins with empty passwords, and root-login? specifies whether to accept log-ins as root.
The other options should be self-descriptive.
This is the type for the OpenSSH secure shell
daemon, sshd. Its value must be an openssh-configuration
record as in this example:
(service openssh-service-type
(openssh-configuration
(x11-forwarding? #t)
(permit-root-login 'prohibit-password)
(authorized-keys
`(("alice" ,(local-file "alice.pub"))
("bob" ,(local-file "bob.pub"))))))
See below for details about openssh-configuration.
This service can be extended with extra authorized keys, as in this example:
(service-extension openssh-service-type
(const `(("charlie"
,(local-file "charlie.pub")))))
This is the configuration record for OpenSSH’s sshd.
port (default: 22)The OpenSSH package to use.
pid-file (default: "/var/run/sshd.pid")Name of the file where sshd writes its PID.
port-number (default: 22)TCP port on which sshd listens for incoming connections.
permit-root-login (default: #f)This field determines whether and when to allow logins as root. If
#f, root logins are disallowed; if #t, they are allowed. If
it’s the symbol 'prohibit-password, then root logins are permitted
but not with password-based authentication.
allow-empty-passwords? (default: #f)When true, users with empty passwords may log in. When false, they may not.
password-authentication? (default: #t)When true, users may log in with their password. When false, they have other authentication methods.
public-key-authentication? (default: #t)When true, users may log in using public key authentication. When false, users have to use other authentication method.
Authorized public keys are stored in ~/.ssh/authorized_keys. This is used only by protocol version 2.
x11-forwarding? (default: #f)When true, forwarding of X11 graphical client connections is enabled—in
other words, ssh options -X and -Y will work.
allow-agent-forwarding? (default: #t)Whether to allow agent forwarding.
allow-tcp-forwarding? (default: #t)Whether to allow TCP forwarding.
gateway-ports? (default: #f)Whether to allow gateway ports.
challenge-response-authentication? (default: #f)Specifies whether challenge response authentication is allowed (e.g. via PAM).
use-pam? (default: #t)Enables the Pluggable Authentication Module interface. If set to #t,
this will enable PAM authentication using
challenge-response-authentication? and
password-authentication?, in addition to PAM account and session
module processing for all authentication types.
Because PAM challenge response authentication usually serves an equivalent
role to password authentication, you should disable either
challenge-response-authentication? or
password-authentication?.
print-last-log? (default: #t)Specifies whether sshd should print the date and time of the last
user login when a user logs in interactively.
subsystems (default: '(("sftp" "internal-sftp")))Configures external subsystems (e.g. file transfer daemon).
This is a list of two-element lists, each of which containing the subsystem name and a command (with optional arguments) to execute upon subsystem request.
The command internal-sftp implements an in-process SFTP server.
Alternatively, one can specify the sftp-server command:
(service openssh-service-type
(openssh-configuration
(subsystems
`(("sftp" ,(file-append openssh "/libexec/sftp-server"))))))
accepted-environment (default: '())List of strings describing which environment variables may be exported.
Each string gets on its own line. See the AcceptEnv option in
man sshd_config.
This example allows ssh-clients to export the COLORTERM variable. It
is set by terminal emulators, which support colors. You can use it in your
shell’s resource file to enable colors for the prompt and commands if this
variable is set.
(service openssh-service-type
(openssh-configuration
(accepted-environment '("COLORTERM"))))
authorized-keys (default: '())This is the list of authorized keys. Each element of the list is a user name followed by one or more file-like objects that represent SSH public keys. For example:
(openssh-configuration
(authorized-keys
`(("rekado" ,(local-file "rekado.pub"))
("chris" ,(local-file "chris.pub"))
("root" ,(local-file "rekado.pub") ,(local-file "chris.pub")))))
registers the specified public keys for user accounts rekado,
chris, and root.
Additional authorized keys can be specified via
service-extension.
Note that this does not interfere with the use of ~/.ssh/authorized_keys.
generate-host-keys? (default: #t)Whether to generate host key pairs with ssh-keygen -A under
/etc/ssh if there are none.
Generating key pairs takes a few seconds when enough entropy is available and is only done once. You might want to turn it off for instance in a virtual machine that does not need it because host keys are provided in some other way, and where the extra boot time is a problem.
log-level (default: 'info)This is a symbol specifying the logging level: quiet, fatal,
error, info, verbose, debug, etc. See the man
page for sshd_config for the full list of level names.
extra-content (default: "")This field can be used to append arbitrary text to the configuration file. It is especially useful for elaborate configurations that cannot be expressed otherwise. This configuration, for example, would generally disable root logins, but permit them from one specific IP address:
(openssh-configuration (extra-content "\ Match Address 192.168.0.1 PermitRootLogin yes"))
Run the Dropbear SSH
daemon with the given config, a <dropbear-configuration>
object.
For example, to specify a Dropbear service listening on port 1234, add this
call to the operating system’s services field:
(dropbear-service (dropbear-configuration
(port-number 1234)))
This data type represents the configuration of a Dropbear SSH daemon.
dropbear (default: dropbear)The Dropbear package to use.
port-number (default: 22)The TCP port where the daemon waits for incoming connections.
syslog-output? (default: #t)Whether to enable syslog output.
pid-file (default: "/var/run/dropbear.pid")File name of the daemon’s PID file.
root-login? (default: #f)Whether to allow root logins.
allow-empty-passwords? (default: #f)Whether to allow empty passwords.
password-authentication? (default: #t)Whether to enable password-based authentication.
This is the type for the AutoSSH
program that runs a copy of ssh and monitors it, restarting it as
necessary should it die or stop passing traffic. AutoSSH can be run
manually from the command-line by passing arguments to the binary
autossh from the package autossh, but it can also be run as
a Guix service. This latter use case is documented here.
AutoSSH can be used to forward local traffic to a remote machine using an SSH tunnel, and it respects the ~/.ssh/config of the user it is run as.
For example, to specify a service running autossh as the user pino
and forwarding all local connections to port 8081 to
remote:8081 using an SSH tunnel, add this call to the operating
system’s services field:
(service autossh-service-type
(autossh-configuration
(user "pino")
(ssh-options (list "-T" "-N" "-L" "8081:localhost:8081" "remote.net"))))
Управление конфигурацией операционной системы.
port (default: 22)The user as which the AutoSSH service is to be run. This assumes that the specified user exists.
port (default: 22)Specifies the connection poll time in seconds.
port (default: 22)Specifies how many seconds AutoSSH waits before the first connection test.
After this first test, polling is resumed at the pace defined in
poll. When set to #f, the first poll is not treated specially
and will also use the connection poll specified in poll.
port (default: 22)Specifies how many seconds an SSH connection must be active before it is considered successful.
speed (default: 1.0)The log level, corresponding to the levels used by syslog—so 0 is
the most silent while 7 is the chattiest.
port (default: 22)The maximum number of times SSH may be (re)started before AutoSSH exits.
When set to #f, no maximum is configured and AutoSSH may restart
indefinitely.
port (default: 22)The message to append to the echo message sent when testing connections.
port (default: 22)The ports used for monitoring the connection. When set to "0",
monitoring is disabled. When set to "n" where n is a
positive integer, ports n and n+1 are used for monitoring the
connection, such that port n is the base monitoring port and
n+1 is the echo port. When set to "n:m" where
n and m are positive integers, the ports n and m are
used for monitoring the connection, such that port n is the base
monitoring port and m is the echo port.
features (default: '())The list of command-line arguments to pass to ssh when it is run.
Options -f and -M are reserved for AutoSSH and may cause
undefined behaviour.
This is the type for the WebSSH
program that runs a web SSH client. WebSSH can be run manually from the
command-line by passing arguments to the binary wssh from the
package webssh, but it can also be run as a Guix service. This
latter use case is documented here.
For example, to specify a service running WebSSH on loopback interface on
port 8888 with reject policy with a list of allowed to connection
hosts, and NGINX as a reverse-proxy to this service listening for HTTPS
connection, add this call to the operating system’s services field:
(service webssh-service-type
(webssh-configuration (address "127.0.0.1")
(port 8888)
(policy 'reject)
(known-hosts '("localhost ecdsa-sha2-nistp256 AAAA…"
"127.0.0.1 ecdsa-sha2-nistp256 AAAA…"))))
(service nginx-service-type
(nginx-configuration
(server-blocks
(list
(nginx-server-configuration
(inherit %webssh-configuration-nginx)
(server-name '("webssh.example.com"))
(listen '("443 ssl"))
(ssl-certificate (letsencrypt-certificate "webssh.example.com"))
(ssl-certificate-key (letsencrypt-key "webssh.example.com"))
(locations
(cons (nginx-location-configuration
(uri "/.well-known")
(body '("root /var/www;")))
(nginx-server-configuration-locations %webssh-configuration-nginx))))))))
Управление конфигурацией операционной системы.
port (default: 22)Используемый пакет webssh.
port (default: 22)User name or user ID that file transfers to and from that module should take place.
port (default: 22)Group name or group ID that will be used when accessing the module.
features (default: '())IP address on which webssh listens for incoming connections.
port (default: 22)TCP port on which webssh listens for incoming connections.
speed (default: 1.0)Connection policy. reject policy requires to specify known-hosts.
inputs (default: '())List of hosts which allowed for SSH connection from webssh.
daemon-socket (default: "/var/guix/daemon-socket/socket")Name of the file where webssh writes its log file.
features (default: '())Logging level.
This variable contains a string for use in /etc/hosts (see Host Names in The GNU C Library Reference Manual). Each line contains a
entry that maps a known server name of the Facebook on-line service—e.g.,
www.facebook.com—to the local host—127.0.0.1 or its IPv6
equivalent, ::1.
This variable is typically used in the hosts-file field of an
operating-system declaration (see /etc/hosts):
(use-modules (gnu) (guix))
(operating-system
(host-name "mymachine")
;; ...
(hosts-file
;; Create a /etc/hosts file with aliases for "localhost"
;; and "mymachine", as well as for Facebook servers.
(plain-file "hosts"
(string-append (local-host-aliases host-name)
%facebook-host-aliases))))
This mechanism can prevent programs running locally, such as Web browsers, from accessing Facebook.
The (gnu services avahi) provides the following definition.
This is the service that runs avahi-daemon, a system-wide
mDNS/DNS-SD responder that allows for service discovery and
“zero-configuration” host name lookups (see https://avahi.org/).
Its value must be an avahi-configuration record—see below.
This service extends the name service cache daemon (nscd) so that it can
resolve .local host names using
nss-mdns. See Служба выбора имён, for information on host name resolution.
Additionally, add the avahi package to the system profile so that
commands such as avahi-browse are directly usable.
Data type representation the configuration for Avahi.
host-name (default: #f)If different from #f, use that as the host name to publish for this
machine; otherwise, use the machine’s actual host name.
publish? (default: #t)When true, allow host names and services to be published (broadcast) over the network.
publish-workstation? (default: #t)When true, avahi-daemon publishes the machine’s host name and IP
address via mDNS on the local network. To view the host names published on
your local network, you can run:
avahi-browse _workstation._tcp
wide-area? (default: #f)When true, DNS-SD over unicast DNS is enabled.
ipv4? (default: #t)ipv6? (default: #t)These fields determine whether to use IPv4/IPv6 sockets.
domains-to-browse (default: '())This is a list of domains to browse.
This is the type of the Open vSwitch
service, whose value should be an openvswitch-configuration object.
Data type representing the configuration of Open vSwitch, a multilayer virtual switch which is designed to enable massive network automation through programmatic extension.
package (default: openvswitch)Package object of the Open vSwitch.
This is the service type for the PageKite
service, a tunneling solution for making localhost servers publicly visible,
even from behind restrictive firewalls or NAT without forwarded ports. The
value for this service type is a pagekite-configuration record.
Here’s an example exposing the local HTTP and SSH daemons:
(service pagekite-service-type
(pagekite-configuration
(kites '("http:@kitename:localhost:80:@kitesecret"
"raw/22:@kitename:localhost:22:@kitesecret"))
(extra-file "/etc/pagekite.rc")))
Управление конфигурацией операционной системы.
port (default: 22)Package object of PageKite.
port (default: 22)PageKite name for authenticating to the frontend server.
speed (default: 1.0)Shared secret for authenticating to the frontend server. You should
probably put this inside extra-file instead.
speed (default: 1.0)Connect to the named PageKite frontend server instead of the pagekite.net service.
kites (default: '("http:@kitename:localhost:80:@kitesecret"))List of service kites to use. Exposes HTTP on port 80 by default. The
format is proto:kitename:host:port:secret.
speed (default: 1.0)Extra configuration file to read, which you are expected to create manually. Use this to add additional options and manage shared secrets out-of-band.
The service type for connecting to the Yggdrasil network, an early-stage implementation of a fully end-to-end encrypted IPv6 network.
Yggdrasil provides name-independent routing with cryptographically generated addresses. Static addressing means you can keep the same address as long as you want, even if you move to a new location, or generate a new address (by generating new keys) whenever you want. https://yggdrasil-network.github.io/2018/07/28/addressing.html
Pass it a value of yggdrasil-configuration to connect it to public
peers and/or local peers.
Here is an example using public peers and a static address. The static
signing and encryption keys are defined in
/etc/yggdrasil-private.conf (the default value for
config-file).
;; part of the operating-system declaration
(service yggdrasil-service-type
(yggdrasil-configuration
(autoconf? #f) ;; use only the public peers
(json-config
;; choose one from
;; https://github.com/yggdrasil-network/public-peers
'((peers . #("tcp://1.2.3.4:1337"))))
;; /etc/yggdrasil-private.conf is the default value for config-file
))
# sample content for /etc/yggdrasil-private.conf
{
# Your public encryption key. Your peers may ask you for this to put
# into their AllowedEncryptionPublicKeys configuration.
EncryptionPublicKey: 378dc5...
# Your private encryption key. DO NOT share this with anyone!
EncryptionPrivateKey: 0777...
# Your public signing key. You should not ordinarily need to share
# this with anyone.
SigningPublicKey: e1664...
# Your private signing key. DO NOT share this with anyone!
SigningPrivateKey: 0589d...
}
Управление конфигурацией операционной системы.
speed (default: 1.0)Package object of Yggdrasil.
inputs (default: '())Contents of /etc/yggdrasil.conf. Will be merged with
/etc/yggdrasil-private.conf. Note that these settings are stored in
the Guix store, which is readable to all users. Do not store your
private keys in it. See the output of yggdrasil -genconf for a
quick overview of valid keys and their default values.
features (default: '())Whether to use automatic mode. Enabling it makes Yggdrasil use adynamic IP and peer with IPv6 neighbors.
log-level (default: 'info)How much detail to include in logs. Use 'debug for more detail.
outputs (default: '("out"))Where to send logs. By default, the service logs standard output to
/var/log/yggdrasil.log. The alternative is 'syslog, which
sends output to the running syslog service.
features (default: '())What HJSON file to load sensitive data from. This is where private keys
should be stored, which are necessary to specify if you don’t want a
randomized address after each restart. Use #f to disable. Options
defined in this file take precedence over json-config. Use the
output of yggdrasil -genconf as a starting point. To configure a
static address, delete everything except these options:
EncryptionPublicKey
EncryptionPrivateKey
SigningPublicKey
SigningPrivateKey
The service type for connecting to the IPFS network,
a global, versioned, peer-to-peer file system. Pass it a
ipfs-configuration to change the ports used for the gateway and API.
Here’s an example configuration, using some non-standard ports:
(service guix-service-type
(guix-configuration
(build-accounts 5)
(use-substitutes? #f)))
Управление конфигурацией операционной системы.
speed (default: 1.0)Package object of IPFS.
speed (default: 1.0)Address of the gateway, in ‘multiaddress’ format.
speed (default: 1.0)Address of the API endpoint, in ‘multiaddress’ format.
This is the type for the Keepalived
routing software, keepalived. Its value must be an
keepalived-configuration record as in this example for master
machine:
(service keepalived-service-type
(keepalived-configuration
(config-file (local-file "keepalived-master.conf"))))
where keepalived-master.conf:
vrrp_instance my-group {
state MASTER
interface enp9s0
virtual_router_id 100
priority 100
unicast_peer { 10.0.0.2 }
virtual_ipaddress {
10.0.0.4/24
}
}
and for backup machine:
(service keepalived-service-type
(keepalived-configuration
(config-file (local-file "keepalived-backup.conf"))))
where keepalived-backup.conf:
vrrp_instance my-group {
state BACKUP
interface enp9s0
virtual_router_id 100
priority 99
unicast_peer { 10.0.0.3 }
virtual_ipaddress {
10.0.0.4/24
}
}
Next: Автоматические обновления, Previous: Networking Setup, Up: Сервисы [Contents][Index]