10.14 Настройка загрузчика

The operating system supports multiple bootloaders. The bootloader is configured using bootloader-configuration declaration. All the fields of this structure are bootloader agnostic except for one field, bootloader that indicates the bootloader to be configured and installed.

Some of the bootloaders do not honor every field of bootloader-configuration. For instance, the extlinux bootloader does not support themes and thus ignores the theme field.

Data Type: bootloader-configuration

The type of a bootloader configuration declaration.

bootloader

The bootloader to use, as a bootloader object. For now grub-bootloader, grub-efi-bootloader, grub-efi-netboot-bootloader, extlinux-bootloader and u-boot-bootloader are supported.

Available bootloaders are described in (gnu bootloader …) modules. In particular, (gnu bootloader u-boot) contains definitions of bootloaders for a wide range of ARM and AArch64 systems, using the U-Boot bootloader.

grub-efi-bootloader allows to boot on modern systems using the Unified Extensible Firmware Interface (UEFI). This is what you should use if the installation image contains a /sys/firmware/efi directory when you boot it on your system.

grub-bootloader allows you to boot in particular Intel-based machines in “legacy” BIOS mode.

grub-efi-netboot-bootloader allows you to boot your system over network through TFTP. In combination with an NFS root file system this allows you to build a diskless Guix system.

The installation of the grub-efi-netboot-bootloader generates the content of the TFTP root directory at targets (see targets), to be served by a TFTP server. You may want to mount your TFTP server directories onto the targets to move the required files to the TFTP server automatically.

If you plan to use an NFS root file system as well (actually if you mount the store from an NFS share), then the TFTP server needs to serve the file /boot/grub/grub.cfg and other files from the store (like GRUBs background image, the kernel (see kernel) and the initrd (see initrd)), too. All these files from the store will be accessed by GRUB through TFTP with their normal store path, for example as tftp://tftp-server/gnu/store/…-initrd/initrd.cpio.gz.

Two symlinks are created to make this possible. For each target in the targets field, the first symlink is ‘target’/efi/Guix/boot/grub/grub.cfg pointing to ../../../boot/grub/grub.cfg, where ‘target’ may be /boot. In this case the link is not leaving the served TFTP root directory, but otherwise it does. The second link is ‘target’/gnu/store and points to ../gnu/store. This link is leaving the served TFTP root directory.

The assumption behind all this is that you have an NFS server exporting the root file system for your Guix system, and additionally a TFTP server exporting your targets directories—usually a single /boot—from that same root file system for your Guix system. In this constellation the symlinks will work.

For other constellations you will have to program your own bootloader installer, which then takes care to make necessary files from the store accessible through TFTP, for example by copying them into the TFTP root directory to your targets.

It is important to note that symlinks pointing outside the TFTP root directory may need to be allowed in the configuration of your TFTP server. Further the store link exposes the whole store through TFTP. Both points need to be considered carefully for security aspects.

Beside the grub-efi-netboot-bootloader, the already mentioned TFTP and NFS servers, you also need a properly configured DHCP server to make the booting over netboot possible. For all this we can currently only recommend you to look for instructions about PXE (Preboot eXecution Environment).

targets

This is a list of strings denoting the targets onto which to install the bootloader.

The interpretation of targets depends on the bootloader in question. For grub-bootloader, for example, they should be device names understood by the bootloader installer command, such as /dev/sda or (hd0) (see Invoking grub-install in GNU GRUB Manual). For grub-efi-bootloader, they should be mount points of the EFI file system, usually /boot/efi. For grub-efi-netboot-bootloader, targets should be the mount points corresponding to TFTP root directories served by your TFTP server.

menu-entries (default: ())

A possibly empty list of menu-entry objects (see below), denoting entries to appear in the bootloader menu, in addition to the current system entry and the entry pointing to previous system generations.

default-entry (default: 0)

The index of the default boot menu entry. Index 0 is for the entry of the current system.

timeout (default: 5)

The number of seconds to wait for keyboard input before booting. Set to 0 to boot immediately, and to -1 to wait indefinitely.

keyboard-layout (default: #f)

If this is #f, the bootloader’s menu (if any) uses the default keyboard layout, usually US English (“qwerty”).

Otherwise, this must be a keyboard-layout object (see Раскладка клавиатуры).

Примечание: This option is currently ignored by bootloaders other than grub and grub-efi.

theme (default: #f)

The bootloader theme object describing the theme to use. If no theme is provided, some bootloaders might use a default theme, that’s true for GRUB.

features (default: '())

The output terminals used for the bootloader boot menu, as a list of symbols. GRUB accepts the values: console, serial, serial_{0-3}, gfxterm, vga_text, mda_text, morse, and pkmodem. This field corresponds to the GRUB variable GRUB_TERMINAL_OUTPUT (see Simple configuration in GNU GRUB manual).

terminal-inputs (default: '())

The input terminals used for the bootloader boot menu, as a list of symbols. For GRUB, the default is the native platform terminal as determined at run-time. GRUB accepts the values: console, serial, serial_{0-3}, at_keyboard, and usb_keyboard. This field corresponds to the GRUB variable GRUB_TERMINAL_INPUT (see Simple configuration in GNU GRUB manual).

serial-unit (default: #f)

The serial unit used by the bootloader, as an integer from 0 to 3. For GRUB, it is chosen at run-time; currently GRUB chooses 0, which corresponds to COM1 (see Serial terminal in GNU GRUB manual).

serial-speed (default: #f)

The speed of the serial interface, as an integer. For GRUB, the default value is chosen at run-time; currently GRUB chooses 9600 bps (see Serial terminal in GNU GRUB manual).

Should you want to list additional boot menu entries via the menu-entries field above, you will need to create them with the menu-entry form. For example, imagine you want to be able to boot another distro (hard to imagine!), you can define a menu entry along these lines:

(menu-entry
  (label "The Other Distro")
  (linux "/boot/old/vmlinux-2.6.32")
  (linux-arguments '("root=/dev/sda2"))
  (initrd "/boot/old/initrd"))

Details below.

Data Type: menu-entry

The type of an entry in the bootloader menu.

label

The label to show in the menu—e.g., "GNU".

port (default: 22)

The Linux kernel image to boot, for example:

(file-append linux-libre "/bzImage")

For GRUB, it is also possible to specify a device explicitly in the file path using GRUB’s device naming convention (see Naming convention in GNU GRUB manual), for example:

"(hd0,msdos1)/boot/vmlinuz"

If the device is specified explicitly as above, then the device field is ignored entirely.

linux-arguments (default: ())

The list of extra Linux kernel command-line arguments—e.g., ("console=ttyS0").

speed (default: 1.0)

A G-Expression or string denoting the file name of the initial RAM disk to use (see G-Expressions).

device (default: #f)

The device where the kernel and initrd are to be found—i.e., for GRUB, root for this menu entry (see root in GNU GRUB manual).

This may be a file system label (a string), a file system UUID (a bytevector, see Файловые системы), or #f, in which case the bootloader will search the device containing the file specified by the linux field (see search in GNU GRUB manual). It must not be an OS device name such as /dev/sda1.

port (default: 22)

The kernel to boot in Multiboot-mode (see multiboot in GNU GRUB manual). When this field is set, a Multiboot menu-entry is generated. For example:

(file-append mach "/boot/gnumach")

arguments (default: '())

The list of extra command-line arguments for the multiboot-kernel.

features (default: '())

The list of commands for loading Multiboot modules. For example:

(list (list (file-append hurd "/hurd/ext2fs.static") "ext2fs"
             …)
      (list (file-append libc "/lib/ld.so.1") "exec"
             …))

For now only GRUB has theme support. GRUB themes are created using the grub-theme form, which is not fully documented yet.

Тип данных: build-machine

Data type representing the configuration of the GRUB theme.

port (default: 22)

The GRUB gfxmode to set (a list of screen resolution strings, see gfxmode in GNU GRUB manual).

Процедура Scheme: sane-service-type

Return the default GRUB theme used by the operating system if no theme field is specified in bootloader-configuration record.

It comes with a fancy background image displaying the GNU and Guix logos.

For example, to override the default resolution, you may use something like

(bootloader
 (bootloader-configuration
 ;; …
 (theme (grub-theme
         (inherit (grub-theme))
         (gfxmode '("1024x786x32" "auto"))))))